2.5" SATA SSD Optional pFAIl MLC NAND E910

Write a Review

Call 714.460.9844 or Email support@mfactors.com to order

SKU:
E910
Availability:
Contact 714.460.9844 or support@mfactors.com

Product Overview

E910 2.5" SATA (WITH optional pFAIL Power Loss Data Protection) 

Emperor Disk proudly introduces the 2.5" SATA (with 32-Bit Quad-Core CPU) solid state drive (SSD). Emperor 910 is a high-performance, quad-core controller that delivers all the advantages of Solid State Drives technology of Serial ATA interface. Supporting up to 8-channels and 64 CE in its NAND Flash interface, it is possible to achieve up to 550 MB/s of Sequential Read and 530MB/s of Write performance and up to 100,000 IOPS at Random Read. 

Emperor 910 delivers all the advantages of Flash Disk technology with Serial ATA I/II/III interface and is fully compliant with the standard 2.5" form factor, provides low power consumption compared to traditional hard drives and it enables hot-swapping when removing/replacing/upgrading flash disks. The device is designed based on the standard 7-pin interface for data segment and 15-pin for power segment. Emperor 910 2.5" SATA runs at a maximum operating frequency of 300MHz with 40MHz external crystal. Available capacity ranges from 128GB to 2TB. Moreover, the SSD can reach up to 550MB/s as well as 530MB/s write high performance based on Toshiba's 15nm Toggle MLC flash (with 256MB/512MB DDR3 cache enabled and measured by CrystalDiskMark v3.0).

Offering improved Read/Write performance, SMART technology, AES256, End-to-End data protection, low power consumption and optional pFAIL circuitry, Emperor 900 2.5" SATA SSD is an ideal storage for embedded systems.

HIGHLIGHTS

  • Easy installation
  • 32-Bit Quad-Core CPU
  • Random Read/Write: 100K/90K IOPS
  • SmartECC- RAID ECC protection
  • End-to-End (ETE) Data Path Protection
  • Toshiba 15nm MLC NAND Flash
  • Write Protect Option
  • Optional pFAIL circuitry
  • Compatible with SATA 1.5Gbps, 3Gbps, 6Gbps interface
  • Supports all types of MLC large block: 8KB/page and 16KB/page NAND Flash
  • Supports ONFI 3.2 interface: SDR and NV-DDR up to mode 5, NV-DDR2 up to mode 7
  • Contains 1pc to 16pcs of TSOP Flash
  • Corrects up to 120bits error in 2K Byte data
  • Supports SMART and TRIM Commands

Optional Industrial Grade Temperature -40°C to 85°C is available

 (Please contact 714-460-9844 or support@mfactors.com)

 

Part

 E910 Series

Capacity

 120GB – 1920GB (2TB)

NAND Flash

 MLC 15nm

Form Factor

 2.5 Inches

Interface

 Serial ATA: SATA III (6G)

Controller

 PS3110

Sequential Read

 Up to 550MB/s

Sequential Write

 Up to 530MB/s

Access Time

 0.1 ms

Dimensions

 100.00 x 69.85 x 7.00mm

Weight

 < 6g

SMART Support

 Yes

TRIM Support

 Yes

End-to-End Data Path Protection Support

 Yes

AES256 Support

 Yes

pFAIL Circuitry with Data Loss Protection

 Optional

Operation Temperature

 0 to 70°C

Storage Temperature

 -40 to 85°C

Operating Voltage

 5.0V ± 5%

Humidity

 RH = 95% under 55°C

Shock

 1500G/0.5ms

Vibration

 80-2000Hz/20G

Idle

 < 400mW

Active

 < 4,450mW

MTBF

 >2,000,000 hours

Wear-leveling

 Static and dynamic wear-leveling

ECC Scheme

 Built-in hardware ECC supports 120bit per 2K Byte data

Compliance:

 RoHS / CE / FCC

OS Support

 Windows 10 / 8.1 / 8 / 7 / Vista / XP / CE
  Mac OS, Linux