OVERVIEW:
M-Factors E912 2.5" Industrial Grade Series offers direct replacement to a conventional 2.5" HDD with significant more rugged, reliable and power-efficient. Containing no moving parts, the E912 SSDs are designed to be used in rugged environments where data reliability requirements are much higher than that of a consumer product. Potential applications are military devices, thin clients, Point of Sale (POS) terminals, telecom, medical instruments, surveillance systems and industrial PCs. The SAFD Series products offer high capacity, greater performance, low power consumptions and extended reliability.
E930 Industrial SATA Flash SSDs are manufactured the newer 3D TLC NAND Flash components in both Standard (0 to 70°C) and Industrial (-40°C to 85°C) Temperature grades. With capacity range from 128GB to 8TB or up to 2TB (for pSLC). Read and Write performance are over 500MB/sec. E912 Industrial SATA SSDs can benefit any embedded application where high reliability or extreme environmental conditions are a must.
FEATURES:
- Perfect solutions for 2.5 SATA applications required durability, performance and high capacity
- Advanced Wear-leveling and Bad Block Management
- Built-in HW ECC, SMART Functions and TRIM Command
- Enhanced Power Failure Prevention and Recovery
- Thermal Sensor to monitor and prevent overheating
- Advance Security Function Opal 2.0, AES256 etc available
SPECIFICATIONS:
OVERVIEW:
M-Factors E912 2.5" Industrial Grade Series offers direct replacement to a conventional 2.5" HDD with significant more rugged, reliable and power-efficient. Containing no moving parts, the E912 SSDs are designed to be used in rugged environments where data reliability requirements are much higher than that of a consumer product. Potential applications are military devices, thin clients, Point of Sale (POS) terminals, telecom, medical instruments, surveillance systems and industrial PCs. The SAFD Series products offer high capacity, greater performance, low power consumptions and extended reliability.
E930 Industrial SATA Flash SSDs are manufactured the newer 3D TLC NAND Flash components in both Standard (0 to 70°C) and Industrial (-40°C to 85°C) Temperature grades. With capacity range from 128GB to 8TB or up to 2TB (for pSLC). Read and Write performance are over 500MB/sec. E912 Industrial SATA SSDs can benefit any embedded application where high reliability or extreme environmental conditions are a must.
FEATURES:
- Perfect solutions for 2.5 SATA applications required durability, performance and high capacity
- Advanced Wear-leveling and Bad Block Management
- Built-in HW ECC, SMART Functions and TRIM Command
- Enhanced Power Failure Prevention and Recovery
- Thermal Sensor to monitor and prevent overheating
- Advance Security Function Opal 2.0, AES256 etc available
SPECIFICATIONS:
|
Model Name
|
U.2 SSD 4TG2-P
|
|
Interface
|
PCIe Gen. 4 x4
|
|
Flash Type
|
Kioxia 3DTLC / pSLC
|
|
Form Factor
|
M.2 2280
|
|
Controller
|
E13T/E13TI
|
|
Dimension (in mm)
|
100.0 x 69.85 x 6.9
|
|
Capacity
|
512GB~16TB
|
|
ECC Support
|
LDPC Based ECC algorithm
|
|
Sequential Read/Write
|
6,950/4,950
|
|
Random 4K Read/Write
|
|
|
Power Consumption
|
13.5W
|
|
Total Bytes Written (TBW)
|
|
|
Security Function
|
OPAL 2.0
|
|
Vibration
|
20G@7~2000Hz
|
|
Shock
|
1500G@0.5ms
|
|
Storage Temperature
|
-40°C ~ +85°C
|
|
Operation Temperature
|
Standard Grade: 0°C ~ +70°C;
Industrial Grade: -40°C ~ +85°C
|
