Product Overview
Best Solution that Easily Latch and Retain Fast Speed 2x mSATA SSD to normally standard 7mm 2.5 inch SATA III Solid State Drive with H/W RAID functionally!
FEATURES
o 6Gbps SATA III H/W RAID Controller
o Convert 2x Full Size mSATA SSD to 7mm 2.5” drive
o Supports SATA I, SATA II, SATA III Host port
o Supports H/W RAID 0, 1, SPAN (Big Drive) and PM (2Drives) Modes
o Not support PM (2Drives) Mode if no Port Multiplier compatible SATA Host connection
o Supports SATA I, SATA II and SATA III (6Gbps) mSATA SSD 2x
o 100% Compatible with 2.5” SATA drive mechanical spec
o 22 pin SATA (Signals and Power) male connector on board
o The mSATA SSD can be the primary bootable device containing the OS and application.
o Latch type mSATA connector on board, no need the screw to retain mSATA SSD
o Transparent to the operating system and no software driver required
o Supports any OS like Windows, Mac and Linux
o Includes 7mm height 2.5 “ drive metal frame with 8 mounting holes and 4 HDD screws
o Dimension of PCBA with 2.5” frame : 100.45mm x 69.85mm x 7mm
o Fully RoHS compliant
Note: Set up H/W RAID
Power off
Set J1
12,45 - RAID 0
23,45 - RAID 1
12,56 - SPAN (Big Drive)
23,56 - PM (2 drives)
Set J2
Connect SET and GND
Power on for 5 sec
Power off
Remove connector from SET and GND
Ready to use
