Product Overview
Monarch U.2 2.5-Inch PCIe Generation 3 X4 NVMe interface SSD. The largest benefit of PCIe-based SSD is ultra high speed performance. The Monarch M7 supports up to 8 channels/32 Flash Chip Enable (CE) capable of delivering Sequential Read/Write of 2.6GB/1.5GB/s and Random Read/Write of 300K/200K (Burst) IOPS.
It is fully in compliance with the standard 2.5-Inch form factor and SFF-8639 connector, PCIe base 3.0 and NVMe 1.1 specifications. The lower power consumption of the U.2 PCIe is also one of the keys feature making it the excellence choice for embedded systems which need high performance drive. The device is designed based on the standard 38pin interface for data and 15pin for power with operating frequency of 200Mhz (25Mhz external crystal).
Contact support@mfactors.com if you need samples for a specific capacity or requirements
Performance
Specifications
Model |
Monarch M Series |
Capacity |
240GB ~ 1960GB |
NAND Flash |
Toshiba 15nm MLC |
Form Factor |
U.2 (2.5 Inches) |
Interface |
PCIe NVMe Gen3 X4 |
Controller |
PS5007 |
Sequential Read |
Up to 2,800MB/s |
Sequential Write |
Up to 1,550MB/s |
Dimensions |
100.00 x 69.85 x 9.50mm |
4KB IOPS |
300K/200K |
Operating Voltage |
12.0V ± 5% |
Operation Temperature |
0°C to 70°C |
Storage Temperature |
-40°C to 85°C |
Idle |
< 0.5W |
Active |
< 7.3W |
MTBF |
>2,000,000 hours |
TRIM Support |
Yes |
SMART Support |
Yes |
Power Loss Protection |
Yes |
Wear-leveling |
Static and dynamic wear-leveling |
ECC Scheme |
Correct up to 120 bits error in 2K byte data |
Power Saving Modes |
Support APST, ASPM, L1.2 |
Humidity |
RH = 95% under 55°C |
Shock |
1500G/0.5ms |
Vibration |
80-2000Hz/20G |
Compliance: |
RoHS / CE / FCC / PCI Express Base 3.0 |
